Insignia NS-FDRE67WH8A User Guide - Page 19

INSTALLATION INSTRUCTIONS 6.7 Cu. Ft. Front-Load Electric and Gas Dryers Step 5: Level your dryer • If your dryer is not level, carefully tilt your dryer just enough to adjust the leveling feet on the bottom of your dryer. Extend the feet only as much as is necessary. If the feet are extended too much, your dryer may vibrate. Level Loosen Tighten Adjustable leg Step 6: Plug in your dryer Make sure that all exhaust and electrical connections are complete, then plug your dryer into the electrical outlet. Step 7: Check the final installation • Before you use your dryer, make sure that: • Your dryer is plugged into an electrical outlet and is properly grounded. • You used rigid or stiff-walled flexible metal vent material. You did not use a plastic flexible ducting. • The exhaust duct work is hooked up and the joints are taped. • The dryer is level and sits firmly on the floor. • Start your dryer to confirm that it runs, heats, and shuts off. www.insigniaproducts.com 19