Insignia NS-FDRE67WH8A User Guide - Page 27

Specifications

Page 27 highlights

USER MAINTENANCE INSTRUCTIONS 6.7 Cu. Ft. Front-Load Electric and Gas Dryers PROBLEM Dryer has an odd odor. Odor remains in clothing even after washing. Clothing is still wrinkled after using the Wrinkle Prevent setting. There is lint on the clothing. SOLUTION • Your dryer draws air from the surrounding room air. Household odors from paint, varnish, strong cleaners, and so forth, may enter your dryer with the surrounding room air. This is normal. When these odors linger in the air, ventilate the room completely before using your dryer. • Fabrics containing strong odors should be rewashed utilizing desired wash cycle. • Small loads of one to four items work best. • If the dryer load is too large, items cannot tumble freely. Try loading fewer items. • Make sure that the items in the dryer load are similar. The Wrinkle Prevent setting works best when the items in the dryer load are similar-type items. • Check pockets thoroughly before washing and drying clothes. Things like paper or tissue can break up into small pieces that turn into lint. • Clean the lint filter before every cycle. Some loads that produce high amounts of lint can clog the filter. • Some fabrics are lint producers (like a fuzzy white cotton towel) and they should be dried separately from clothes that are lint trappers (like a pair of black linen pants). • Divide larger loads into smaller loads for drying. Understanding the error codes Your dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. ERROR CODE POSSIBLE CAUSE C9 The PCBs failed. E4 The humidity sensor failed. E5 The temperature sensor failed. SOLUTIONS Contact authorized service personnel for help. DO NOT use your dryer. Your dryer will complete the current operating cycle but items could be over dried. Your dryer can still operate under the Time cycles. Contact authorized service personnel for help. Contact authorized service personnel for help. DO NOT use your dryer. Specifications NS-FDRE67WH8A-C/NS-FDRE67WH8A Dimensions (H × W × D) 42.9 x 27 x 30.1 in. (109 x 68.6 x 76.5 cm) Weight Gross: 143.3 Ibs (65 kg) Net:127.8 lbs (57.9 kg) Power 120V/240V AC 60Hz Current draw 23A NS-FDRG67WH8A Dimensions (H × W × D) 42.9 x 27 x 30.1 in. (109 x 68.6 x 76.5 cm) Weight Gross: 143.3 Ibs (65 kg) Net:127.8 lbs (57.9 kg) Power 120V AC 60Hz Current draw 11A www.insigniaproducts.com 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

27
6.7 Cu. Ft. Front-Load Electric and Gas Dryers
www.insigniaproducts.com
USER MAINTENANCE INSTRUCTIONS
Understanding the error codes
Your dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early
stage.
Specifications
Dryer has an odd
odor.
Your dryer draws air from the surrounding room air. Household odors from paint, varnish,
strong cleaners, and so forth, may enter your dryer with the surrounding room air. This is
normal. When these odors linger in the air, ventilate the room completely before using your
dryer.
Odor remains in
clothing even after
washing.
Fabrics containing strong odors should be rewashed utilizing desired wash cycle.
Clothing is still
wrinkled after using
the
Wrinkle
Prevent
setting.
Small loads of one to four items work best.
If the dryer load is too large, items cannot tumble freely. Try loading fewer items.
Make sure that the items in the dryer load are similar. The
Wrinkle Prevent
setting works best
when the items in the dryer load are similar-type items.
There is lint on the
clothing.
Check pockets thoroughly before washing and drying clothes. Things like paper or tissue can
break up into small pieces that turn into lint.
Clean the lint filter before every cycle. Some loads that produce high amounts of lint can clog
the filter.
Some fabrics are lint producers (like a fuzzy white cotton towel) and they should be dried
separately from clothes that are lint trappers (like a pair of black linen pants).
Divide larger loads into smaller loads for drying.
PROBLEM
SOLUTION
ERROR CODE
POSSIBLE CAUSE
SOLUTIONS
C9
The PCBs failed.
Contact authorized service
personnel for help. DO NOT use
your dryer.
E4
The humidity sensor failed.
Your dryer will complete the
current operating cycle but items
could be over dried. Your dryer can
still operate under the Time cycles.
Contact authorized service
personnel for help.
E5
The temperature sensor failed.
Contact authorized service
personnel for help. DO NOT use
your dryer.
NS-FDRE67WH8A-C/NS-FDRE67WH8A
Dimensions
(H × W × D)
42.9 x 27 x 30.1 in. (109 x 68.6 x 76.5 cm)
Weight
Gross: 143.3 Ibs (65 kg)
Net:127.8 lbs (57.9 kg)
Power
120V/240V AC 60Hz
Current draw
23A
NS-FDRG67WH8A
Dimensions
(H × W × D)
42.9 x 27 x 30.1 in. (109 x 68.6 x 76.5 cm)
Weight
Gross: 143.3 Ibs (65 kg)
Net:127.8 lbs (57.9 kg)
Power
120V AC 60Hz
Current draw
11A