Insignia NS-FDRE67WH8A User Guide - Page 20

Reversing the dryer door

Get Insignia NS-FDRE67WH8A PDF manuals and user guides View all Insignia NS-FDRE67WH8A manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

INSTALLATION INSTRUCTIONS Reversing the dryer door 1 Make sure that the power cord is unplugged. 2 While supporting the door, remove the four hinge screws from the door, then lift the door to remove it and set the door aside. Remove the screws Remove the screws CAUTION: Be careful not to drop the door when removing the screws. 3 Remove the screws for the locker cover on the right side of the dryer and the screws for the locker cover on the left side of the dryer. Remove the locker screws Remove the locker cover screws 4 Install the locker onto the right side of the dryer with the screws you just removed, then install the locker cover on the left side of the dryer. 5 Remove the screws around the door. 20 www.insigniaproducts.com

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
20
INSTALLATION INSTRUCTIONS
www.insigniaproducts.com
Reversing the dryer door
1
Make sure that the power cord is unplugged.
2
While supporting the door, remove the four hinge screws from the door, then lift the door to remove it and set
the door aside.
3
Remove the screws for the locker cover on the right side of the dryer and the screws for the locker cover on the
left side of the dryer.
4
Install the locker onto the right side of the dryer with the screws you just removed, then install the locker cover
on the left side of the dryer.
5
Remove the screws around the door.
CAUTION:
Be careful not to drop the door when removing the screws.
Remove the screws
Remove the screws
Remove the
locker cover
screws
Remove the
locker screws