Insignia NS-FDRE67WH8A User Guide - Page 23

OPERATING INSTRUCTIONS 6.7 Cu. Ft. Front-Load Electric and Gas Dryers Unloading your dryer 1 When the drying cycle is over, your dryer beeps six times and the Clean Filter indicator lights. 2 Open the door and remove the items. Note: You should clean the lint filter after every load to avoid lint buildup and to make sure that your dryer is running efficiently. See Cleaning the lint filter on page 23. Setting the child lock Your dryer has a child lock feature to prevent children from playing with your dryer. When you turn on the child lock, the only button that works is /POWER. • You can turn on your dryer, set this function, then turn it off. • When you do so, even if the unit is powered on, you still cannot start it before the Child Lock function is deactivated. • This function is cancelled automatically if your unit is out of power, such as when you unplug it or the power turns off. 1 Press and hold both the Dryness and Temp buttons for three seconds. The blue child lock light turns on. 2 To turn off the child lock, press and hold both the Dryness and Temp buttons for three seconds. Cleaning the lint filter WARNING: Do not operate your dryer without the lint filter in place. Note: • You should clean the lint filter after every load to shorten the drying time and to make sure that your dryer is running efficiently. • If the lint is difficult to wipe away, you can gently wash the filter in mild, soapy water. Make sure that you rinse all the soap off the filter and that the filter is dry before you put it back into your dryer. • Gently pull the lint filter out of the slot at the bottom of the drum. Remove the accumulated lint, then insert the filter back into the slot. Lint filter Front frame Door www.insigniaproducts.com 23