Insignia NS-HMSB20 User Guide - Page 18
WARNING, on the screws.
View all Insignia NS-HMSB20 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
NS-HMSB20 4 If you are mounting on drywall without studs or on concrete, install wall anchors (included) into the holes you drilled. 5 Secure two screws (included) to the wall or wall anchors (if required). The screws must protrude from the wall by about 5/32" (4 mm). Use a 9/16" (3.6 mm) self-tapping wood screw (or similar), 1-1/8" (28.5 mm) in length. The screw head must be approximately 9/32" (7 mm). 11.4" (29 cm) Approx. 5/32" (4 mm) Wall 6 Align the speaker hanging brackets with the screws, then hang the soundbar on the screws. WARNING: Improper installation can result in serious injury or damage to your soundbar. If necessary, seek the assistance of a professional. 18 www.insigniaproducts.com
18
NS-HMSB20
www.insigniaproducts.com
4
If you are mounting on drywall without studs or on concrete, install wall
anchors (included) into the holes you drilled.
5
Secure two screws (included) to the wall or wall anchors (if required). The
screws must protrude from the wall by about 5/32" (4 mm). Use a 9/16” (3.6
mm) self-tapping wood screw (or similar), 1-1/8" (28.5 mm) in length. The
screw head must be approximately 9/32" (7 mm).
6
Align the speaker hanging brackets with the screws, then hang the soundbar
on the screws.
WARNING:
Improper installation can result in serious injury or damage to your
soundbar. If necessary, seek the assistance of a professional.
Approx.
5/32
"
(4 mm)
Wall
11.4" (29 cm)