Insignia NS-R2000 User Manual (English) - Page 11

Insignia NS-R2000 Stereo Receiver 2 Within the tone mode, press the or to adjust the tone. OR Listening to radio broadcasts Auto tuning To auto tune a radio station: 1 Press TUNER on the receiver or FM/AM on the remote control to select the band. OR Note • • • • If the tone display disappears, start again from step 1. When pressing the TREBLE up/down or BASS up/down buttons, you can skip step 1. Extreme settings at high volume may damage your speakers. In general, the bass and treble levels are adjusted to 0. 3 Press the TONE DIRECT button to listen to a program without the tone effect. Note • • TON DIR is displayed, DIRECT lights up and the sound bypasses the tone circuitry. To cancel the tone direct function, press this button again. TON CTRL and DIRECT turns off. Adjusting the sound volume balance To adjust the sound volume balance: 1 Press Balance. BAL and the balance level are displayed for three seconds. 2 Adjust the sound volume balance between the left and right speakers. 1 2 Item Description 1 Band 2 Frequency Each time this button is pressed, the band changes from AM to FM, and vice versa. When the tuner is selected by pressing the TUNER or the FM/AM button, you can select the band by pressing the BAND button on the front panel as well. 2 Press T/P MODE to select the tuning mode. OR Note • • If the balance display disappears, start again from step 1. In general, the balance levels are adjusted to 0. Note Each time this button is pressed, the mode changes as follows: • TUNING mode-PRESET turns off. • PRESET mode-PRESET lights up.. www.insignia-products.com 9