Insignia NS-R2000 User Manual (English) - Page 9
Using the remote control, Using your receiver, Listening to a program
UPC - 600603110795
View all Insignia NS-R2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Insignia NS-R2000 Stereo Receiver 2 Load two type AAA batteries into the compartment matching the polarity indicated. 3 Replace the cover. Use the remote control within about 23 feet (7 meters) of the receiver and within 30 degrees of perpendicular to the front of the receiver. Caution • Do not expose the remote control to shock. In addition, do not expose the remote control to liquids, and do not place in an area with high humidity. • Do not place the remote control under direct sunlight. The heat may cause deformation of the remote control. • The remote control may not work properly if the remote sensor window of the receiver is under direct sunlight or strong lighting. In such a case, change the angle of the lighting or receiver, or operate the remote control closer to the remote sensor window. Using your receiver Note Remove the batteries if they are not to be used for a long period of time. Using the remote control Use the remote control by pointing it towards the receiver's remote sensor window. Objects between the remote control and sensor window may prevent proper operation. Tip The following settings are stored in memory before the receiver is turned off: • INPUT SELECTOR settings • Preset stations. If the electricity fails or the AC power cord is unplugged for more than two weeks, your memory is cleared. Listening to a program To listen to a program: 1 Press the POWER button on the receiver to put the receiver in Standby mode. The STANDBY indicator lights up. Tip You can turn the receiver off by pressing the POWER button on the receiver while it is in Standby mode. 2 Press the POWER ON button on the remote control to turn the receiver on. 23' (7m) OR Tip You can put the receiver in Standby mode by pressing the STANDBY button on the remote control when the receiver is on. Tip With the receiver in Standby mode, you can also turn the power on by pressing an Input Selector button. www.insignia-products.com 7