Insignia NS-SB515 User Manual English - Page 5

Insignia Soundbar with Wireless Subwoofer Package contents Soundbar TOOLS NEEDED Drill a hole here Wall anchors (2) Screws (2) #10 × 1 ½ in. (3.8 cm) wood screw (or similar) Wall mount template Locate/Position holes onto studs behind drywall when possible, -or use anchors for mounting Warning: Improper installation can result in serious injury or damage to your soundbar. If necessary, seek the assistance of a professional. HOLD THE LEVEL TO THE TOP EDGE OF THIS TEMPLATE Center Line Determine where you would like to mount the soundbar. The center line of the template should match the center of the TV. Note: If you are mounting to drywall, use a studfinder to locate studs. A wall anchor is not needed if you are attaching to a stud. Hold this template in the location you want, and use a level to level it, then tape it to the wall. Wall Drill two holes at the indicated points. Scale: 1/1 Center Line Wall Anchor Remove the template from the wall. You must use suitable wall anchors (not supplied) if you cannot mount the soundbar to available wall studs. Wall 1/4 in. (6 to 8 mm) Fasten two screws (not supplied) to the wall. The screw heads should protrude from the wall approximately 1/4 in. (6 to 8 mm). The screw width must be about 3/16 in. and the screw head about .3 in. (7.6 mm) to 3/8 in. (9.5 mm). Soundbar Wall Align the speaker hanging brackets with the screws, then hang the soundbar on the screws. Wall Mounting Template Drill a hole here Center Line User Guide Wireless subwoofer Remote Control and battery RCA Audio Cable Quick Setup Guide AC Adapter RCA to 3.5 mm Adapter www.insigniaproducts.com 5