Insignia NS-TDRE75W1 User Guide - Page 41
Understanding the error codes, Wrinkle, Prevent, ERROR CODE, POSSIBLE CAUSE, SOLUTIONS, PROBLEM
View all Insignia NS-TDRE75W1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
USER MAINTENANCE INSTRUCTIONS 10-Cycle Electric and Gas Dryers PROBLEM SOLUTION Dryer shuts off before the clothes are dried. Dryer has an odd odor. Clothing is still wrinkled after using the Wrinkle Prevent setting. There is lint on the clothing. • The dryer load is too small. Add more items or a few towels and restart the cycle. • The dryer load is too large. Remove some items and restart the cycle. • Consider using a Time dry cycle. • Your dryer draws air from the surrounding room air. Household odors from paint, varnish, strong cleaners, and so forth, may enter your dryer with the surrounding room air. This is normal. When these odors linger in the air, ventilate the room completely before using your dryer. • Small loads of one to four items work best. • If the dryer load is too large, items cannot tumble freely. Try loading fewer items. • Make sure that the items in the dryer load are similar. The Wrinkle Prevent setting works best when the items in the dryer load are similar-type items. • Check pockets thoroughly before washing and drying clothes. Things like paper or tissue can break up into small pieces that turn into lint. • Clean the lint filter before every cycle. Some loads that produce high amounts of lint can clog the filter. • Some fabrics are lint producers (like a fuzzy white cotton towel) and they should be dried separately from clothes that are lint trappers (like a pair of black linen pants). • Divide larger loads into smaller loads for drying. Understanding the error codes Your dryer is equipped with an automatic error-monitoring system to detect and diagnose problems at an early stage. ERROR CODE POSSIBLE CAUSE C9 The PCBs failed. E4 The humidity sensor failed. E5 The temperature sensor failed. SOLUTIONS Contact authorized service personnel for help. DO NOT use your dryer. Your dryer will complete the current operating cycle but items could be over dried. Your dryer can still operate under the Time cycles. Contact authorized service personnel for help. Contact authorized service personnel for help. DO NOT use your dryer. www.insigniaproducts.com 41