Intel AN430TX Product Specification - Page 42
Processor Configuration (J9C1-C, D)
![]() |
View all Intel AN430TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
AN430TX Motherboard Technical Product Specification Table 29. Jumper Settings Function Processor Voltage Password Jumper J6M1 J9C1-A CMOS (NVRAM and ESCD) Clear J9C1-A BIOS Setup Access J9C1-B Reserved J9C1-B Host Bus Frequency* Processor Frequency BIOS recovery J9C1-C J9C1-D J8A1 * These jumpers also set the PCI and ISA bus frequencies Configuration 1-2 Standard voltage 2-3 VRE voltage (Default) 1-2 Password enabled (Default) 2-3 Password clear/disabled 4-5 Keep (Default) 5-6 Clear 1-2 Access enabled (Default) 2-3 Access denied 4-5 (Reserved) 5-6 (Reserved) See Table 30 See Table 30 1-2 Normal (Default) 2-3 Recovery 1.13.1 Processor Configuration (J9C1-C, D) The motherboard must be configured for the frequency of the installed processor. Table 30 shows the jumper settings for each frequency and the corresponding host bus, PCI bus, and ISA bus frequencies. Table 30. Jumper Settings for Processor and Bus Frequencies Processor Freq. (MHz) 200 166 150 133 120 100 90 Jumpers J9C1-C 5-6 5-6 4-5 5-6 4-5 5-6 4-5 Jumpers J9C1-D 1-2 and 5-6 2-3 and 5-6 2-3 and 5-6 2-3 and 4-5 2-3 and 4-5 1-2 and 4-5 1-2 and 4-5 Host Bus PCI Bus ISA Bus Bus/Processor Freq. (MHz) Freq. (MHz) Freq. (MHz) Freq. Ratio 66 33 8.33 3 66 33 8.33 2.5 60 30 7.5 2.5 66 33 8.33 2 60 30 7.5 2 66 33 8.33 1.5 60 30 7.5 1.5 NOTE There are no separate or additional jumpering requirements for Pentium processors with MMX technology. 42
![](/manual_guide/products/intel-an430tx-product-specification-2872db7/42.png)