Intel BB5000XALR Specification Update - Page 9

Monthly Specification Update Enterprise Platforms and Services Marketing 27. Fixed System hangs after disabling onboard video in BIOS setup. 28. Fixed The SMBIOS entry point may not be visible under certain hardware configurations. 29. Fixed Intel® Embedded Server RAID Technology II and IO module IRQ routing conflict. 30. No Fix SuSE* Linux Enterprise Server may not install successfully with Intel® Embedded Server RAID Technology II enabled. 31. No Fix Red Hat* Enterprise Linux 4 and BIOS setup display a different L2 cache size for the Quad-Core Intel® Xeon® processor 5300 Series. 32. Fixed Change Logo Utility causes BIOS corruption. 33. Fixed Microsoft Windows System Event Viewer* may record Error Event with ID 11 34. Fixed POST screen may generate "NMI has been received - System Halted" message after the system reboots. 35. Fixed Intel® RAID Web Console 2 utility displays "Unexpected Sensor" warning message in Microsoft Windows* operating system. 36. Fixed Random drives may go offline when a sixth drive is installed and Intel® Embedded Server RAID Technology II is enabled in the Intel® Server System SR2500ALBRP. 37. No Fix Intel recommends enterprise class hard drives for use with Intel® Server Systems. 38. Fix Dual Gigabit Expansion Module may not properly reset. 39. Fixed SAS drive in a ROMB RAID 5 may drop offline during a reboot in the Intel® Server System SR2500PALLX. 40. No fix Intel® Server System SR2500ALLX sixth hard drive filler panel is difficult to remove. 41. No fix SUSE* Linux Enterprise Server unable to boot after basic installation. 42. Fixed Drives may not be detected or may go offline in the Intel® Server System SR2500ALBRP when operating at SATA 300 MB/s data rate. 43. No Fix New versions of BMC firmware with previous versions of BIOS cause system POST failure. 44. Fixed Intel® Server System SR2500ALLX may operate louder than expected. 45. No Fix Red Hat* Enterprise Linux may report the wrong processor speed. 46. Fixed The SuSE* Linux Enterprise Server 10 driver for SAS HW RAID causes unwanted error logs during installation. 47. Fixed IERR or thermal trip event reported in System Event Log (SEL) after system power on. 48. No Fix USB device generates "The following boot-start or system-start driver(s) failed to load: i8042prt" error message in Windows* operating systems. 49. No Fix Microsoft Windows* and Intel® RAID Web Console II report an error when the ASR2500SATAPE kit is used. 50. No Fix System may log IERRs when running Red Hat* Enterprise Linux 4, Update 4 on the Intel® Server Board S5000PAL with video driver ati_drv.o 6.5.6. 51. Fixed Microsoft Windows* operating system installed without a service pack will display blue screen with BIOS 79 and 81. 52. Fixed Sluggish system performance may be experienced with BMC60. 53. No Fix Downgrading the firmware of the Integrated RAID (ROMB), Intel® Embedded Server RAID Technology II or SAS may cause system damage. 54. Fixed In the Intel® Server Systems SR2500ALLX and SR1550ALSAS, flashing of SAS firmware 1.22 and SAS BIOS 06.16.00 makes hard drive #1 (upper left drive tray) undetected during SAS controller scanning. 55. Fixed Microsoft Windows 2003 R2 SP2* may display blue screen during an operating system boot or shutdown with a specific version of Intel I/OAT driver. 56. Fix Server System Event Log (SEL) time may be one day later than BIOS time after entering year 2008. 57. Fix Performance Power Management Error in Microsoft Windows Server 2008*. 58. Fixed Midplane2 hardware RAID produces unexpected beep sounds during system POST. 59. Fixed Platform Confidence Test (PCT) fails with BIOS 88 and later version. 60. Fix USB mouse may hang in BIOS 94 RAID Console. 3