Intel BLKD945GCLF2D Product Specification - Page 20
S-Video Output, Legacy I/O Controller
View all Intel BLKD945GCLF2D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Intel Desktop Board D945GCLF2 Technical Product Specification 1.8 S-Video Output The D945GCLF2 desktop board supports S-Video output via a 7-pin S-Video connector supporting both 4-pin S-Video and Composite signal. S-Video output is not available on the D945GCLF2D desktop board. 1.9 Legacy I/O Controller The I/O controller provides the following features: • One serial port • One parallel port with Extended Capabilities Port (ECP) and Enhanced Parallel Port (EPP) support • Serial IRQ interface compatible with serialized IRQ support for PCI Conventional bus systems • PS/2-style mouse and keyboard interfaces • Intelligent power management, including a programmable wake-up event interface • PCI Conventional bus power management support The BIOS Setup program provides configuration options for the I/O controller. 1.9.1 Serial Port The serial port A connector is located on the back panel. The serial port supports data transfers at speeds up to 115.2 kbits/sec with BIOS support. For information about The location of the serial port A connector Refer to Figure 8, page 41 1.9.2 Parallel Port The 25-pin D-Sub parallel port connector is located on the back panel. Use the BIOS Setup program to set the parallel port mode. For information about The location of the parallel port connector Refer to Figure 8, page 41 20