Intel BLKD945GCLF2D Product Specification - Page 66
BIOS Beep Codes, BIOS Error Messages
![]() |
View all Intel BLKD945GCLF2D manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Intel Desktop Board D945GCLF2 Technical Product Specification 4.2 BIOS Beep Codes Whenever a recoverable error occurs during POST, the BIOS causes the board's speaker to beep an error message describing the problem (see Table 32). NOTE For Intel Desktop Board D945GCLF2, the beep code is only audible through a speaker connected to the green audio line out connector on the back panel. See Figure 3 on page 23 for information on the back panel audio connectors. Table 32. Beep Codes Type Pattern Memory error Thermal warning Three long beeps Four alternating beeps: High tone, low tone, high tone, low tone Frequency 1280 Hz High tone: 2000 Hz Low tone: 1600 Hz 4.3 BIOS Error Messages Whenever a recoverable error occurs during POST, the BIOS displays an error message describing the problem. Table 33 lists the error messages and provides a brief description of each. Table 33. BIOS Error Messages Error Message Explanation CMOS Battery Low CMOS Checksum Bad The battery may be losing power. Replace the battery soon. The CMOS checksum is incorrect. CMOS memory may have been corrupted. Run Setup to reset values. Memory Size Decreased Memory size has decreased since the last boot. If no memory was removed, then memory may be bad. No Boot Device Available System did not find a device to boot. 66
![](/manual_guide/products/intel-blkd945gclf2d-product-specification-af818aa/66.png)