Intel BLKD945GSEJT Product Guide - Page 18
LAN Subsystem, LAN Status LEDs
View all Intel BLKD945GSEJT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Intel Desktop Board D945GSEJT Product Guide LAN Subsystem The LAN subsystem consists of the following: • Intel 82801GBM ICH7-M • Realtek 8111D Gigabit Ethernet Controller for 10/100/1000 Mbits/sec Ethernet LAN connectivity • RJ-45 LAN connector with integrated status LEDs Additional features of the LAN subsystem include: • CSMA/CD protocol engine • LAN connect interface that supports the ethernet controller • PCI bus power management ⎯ Supports ACPI technology ⎯ Supports LAN wake capabilities LAN drivers are available from Intel's World Wide Web site at http://downloadcenter.intel.com/. LAN Status LEDs Two LEDs are built into the RJ-45 LAN connector located on the back panel (see Figure 2). These LEDs indicate the operating states of the LAN. Figure 2. LAN Status LEDs Table 3 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 3. LAN Status LEDs LED Link (A) Speed (B) LED Color N/A Green N/A Green Yellow LED State Off On (steady state) Blinking Off On (steady state) On (steady state) Indicates LAN link is not established. LAN link is established. LAN activity is occurring. 10 Mbits/s data rate is selected. 100 Mbits/s data rate is selected. 1000 Mbits/s data rate is selected. 18