Intel D34010WYK Technical Product Specification - Page 50
Table 22., BIOS Security Jumper Settings
View all Intel D34010WYK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Intel NUC Board D54250WYB and Intel NUC Board D34010WYB Technical Product Specification Table 22 lists the settings for the jumper. Table 22. BIOS Security Jumper Settings Function/Mode Normal Lockdown Configuration Mode Jumper Setting 1-2 2-3 None Configuration The BIOS uses current configuration information and passwords for booting. The BIOS uses current configuration information and passwords for booting, except: • All POST Hotkeys are suppressed (prompts are not displayed and keys are not accepted. For example, F2 for Setup, F10 for the Boot Menu). • Power Button Menu (see Section 3.7.4) BIOS updates are not available except for automatic Recovery due to flash corruption. BIOS Recovery Update process if a matching *.bio file is found. Recovery Update can be cancelled by pressing the Esc key. If the Recovery Update was cancelled or a matching *.bio file was not found, a Config Menu will be displayed. The Config Menu consists of the following (followed by the Power Button Menu selections): [1] Suppress this menu until the BIOS Security Jumper is replaced. [2] Clear BIOS User and Supervisor Passwords. [3] Reset Intel AMT to default factory settings. [4] Clear Trusted Platform Module. For information on the Power Button Menu, see Section 3.7.4. 50