Intel D425KT Product Specification - Page 16

System Memory, Table 3., Supported Memory Configurations - specification

Get Intel D425KT PDF manuals and user guides View all Intel D425KT manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product Specification 1.4 System Memory The board has two 204-pin DDR3 SO-DIMM sockets and supports the following memory features: • DDR3 SDRAM SO-DIMMs with gold-plated contacts • Unbuffered, single-sided or double-sided SO-DIMMs • 4 GB maximum total system memory • Minimum total system memory: 256 MB • Non-ECC SO-DIMMs • Serial Presence Detect • DDR3 800 MHz, DDR3 1066 MHz, and DDR3 1333 MHz SO-DIMMs (DDR3 1066 MHz and DDR3 1333 MHz memory will run at 800 MHz) NOTE Due to passively-cooled thermal constraints, system memory must have an operating temperature rating of 85 oC. The board is designed to be passively cooled in a properly ventilated chassis. Chassis venting locations are recommended above the system memory area for maximum heat dissipation effectiveness. NOTE To be fully compliant with all applicable DDR3 SDRAM memory specifications, the board should be populated with SO-DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance. If nonSPD memory is installed, performance and reliability may be impacted or the SODIMMs may not function under the determined frequency. Table 3 lists the supported DIMM configurations. Table 3. Supported Memory Configurations DIMM Capacity Configuration SDRAM Density SDRAM Organization Front-side/Back-side Number of SDRAM Devices 1024 MB DS 1 Gbit 64 M x16/64 M x16 8 1024 MB SS 1 Gbit 128 M x8/empty 8 2048 MB DS 2 Gbit 128 M x16/128 M x16 8 2048 MB SS 2 Gbit 256 M x8/empty 8 Note: In the second column, "DS" refers to double-sided memory modules (containing two rows of SDRAM) and "SS" refers to single-sided memory modules (containing one row of SDRAM). 16

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
Intel Desktop Board D425KT and Intel Desktop Board D425KTW Technical Product
Specification
16
1.4
System Memory
The board has two 204-pin DDR3 SO-DIMM sockets and supports the following
memory features:
•
DDR3 SDRAM SO-DIMMs with gold-plated contacts
•
Unbuffered, single-sided or double-sided SO-DIMMs
•
4 GB maximum total system memory
•
Minimum total system memory:
256 MB
•
Non-ECC SO-DIMMs
•
Serial Presence Detect
•
DDR3 800 MHz, DDR3 1066 MHz, and DDR3 1333 MHz SO-DIMMs
(DDR3 1066 MHz and DDR3 1333 MHz memory will run at 800 MHz)
NOTE
Due to passively-cooled thermal constraints, system memory must have an operating
temperature rating of 85
o
C.
The board is designed to be passively cooled in a properly ventilated chassis.
Chassis
venting locations are recommended above the system memory area for maximum
heat dissipation effectiveness.
NOTE
To be fully compliant with all applicable DDR3 SDRAM memory specifications, the
board should be populated with SO-DIMMs that support the Serial Presence Detect
(SPD) data structure.
This allows the BIOS to read the SPD data and program the
chipset to accurately configure memory settings for optimum performance.
If non-
SPD memory is installed, performance and reliability may be impacted or the SO-
DIMMs may not function under the determined frequency.
Table 3 lists the supported DIMM configurations.
Table 3.
Supported Memory Configurations
DIMM
Capacity
Configuration
SDRAM
Density
SDRAM Organization
Front-side/Back-side
Number of SDRAM
Devices
1024 MB
DS
1 Gbit
64 M x16/64 M x16
8
1024 MB
SS
1 Gbit
128 M x8/empty
8
2048 MB
DS
2 Gbit
128 M x16/128 M x16
8
2048 MB
SS
2 Gbit
256 M x8/empty
8
Note: In the second column, “DS” refers to double-sided memory modules (containing two rows of SDRAM)
and “SS” refers to single-sided memory modules (containing one row of SDRAM).