Intel D525MW Product Guide - Page 29
Connecting SATA Drives, Connecting the Serial ATA Cable - support
View all Intel D525MW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Installing and Replacing Desktop Board Components Connecting SATA Drives The board has two SATA connectors each supporting one SATA drive. The included SATA cables support the Serial ATA protocol. For correct cable and drive function: 1. Observe the precautions in "Before You Begin" on page 23. 2. Attach one end of the cable to the connector on the board (Figure 8, A) and connect the other end to the drive (Figure 8, B). Figure 8. Connecting the Serial ATA Cable 29
Installing and Replacing Desktop Board Components
29
Connecting SATA Drives
The board has two SATA connectors each supporting one SATA drive.
The included
SATA cables support the Serial ATA protocol.
For correct cable and drive function:
1.
Observe the precautions in "Before You Begin" on page 23.
2.
Attach one end of the cable to the connector on the board (Figure 8, A) and
connect the other end to the drive (Figure 8, B).
Figure 8.
Connecting the Serial ATA Cable