Intel D845GLLY D845GL_Boards_TechProdSpec - Page 28
LAN Subsystem - network driver
View all Intel D845GLLY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Technical Product Specification for Intel Desktop Boards using the Intel 845GL Chipset The audio subsystem supports the following audio interfaces: • ATAPI-style connectors: Auxiliary line in CD-ROM • Front panel audio connector11, including pins for: Line out Mic in • Back panel audio connectors: Line out Line in Mic in 1.9.1 Audio Connectors 1.9.1.1 Auxiliary Line In Connector A 1 x 4-pin ATAPI-style connector connects the left and right channel signals of an internal audio device to the audio subsystem. 1.9.1.2 ATAPI CD-ROM Audio Connector A 1 x 4-pin ATAPI-style connector connects an internal ATAPI CD-ROM drive to the audio mixer. 1.9.2 Audio Subsystem Software Audio software and drivers are available from Intel's World Wide Web site. For information about Obtaining audio software and drivers Refer to Section 1.2, page 12 1.10 LAN Subsystem The Network Interface Controller subsystem consists of the ICH4 (with integrated LAN Media Access Controller) and a physical layer interface device. Features of the LAN subsystem include12: • PCI Bus Master interface • CSMA/CD Protocol Engine • PCI Power Management Supports ACPI technology Supports LAN wake capabilities 11 The front panel audio connector is not present on all boards that contain the audio subsystem. Contact your Intel sales representative to determine if the front panel audio connector is present on your Intel Desktop Board. 12 Contact your Intel sales representative to determine if the LAN subsystem is present on your Intel Desktop Board. 28