Intel D845GLLY D845GL_Boards_TechProdSpec - Page 36
V Standby Power Indicator LED
View all Intel D845GLLY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Technical Product Specification for Intel Desktop Boards using the Intel 845GL Chipset 1.12.2.5 +5 V Standby Power Indicator LED The +5 V standby power indicator LED15 shows that power is still present even when the computer appears to be off. CAUTION If AC power has been switched off and the standby power indicator is still lit, disconnect the power cord before installing or removing any devices connected to the board. Failure to do so could damage the board and any attached devices. 1.12.2.6 Resume on Ring The operation of Resume on Ring can be summarized as follows: • Resumes operation from ACPI S1 or S3 states • Detects incoming call similarly for external and internal modems • Requires modem interrupt be unmasked for correct operation 1.12.2.7 Wake from USB USB bus activity wakes the computer from ACPI S1 or S3 states. ✏ NOTE Wake from USB requires the use of a USB peripheral that supports Wake from USB. 1.12.2.8 Wake from PS/2 Devices PS/2 device activity wakes the computer from ACPI S1 or S3 states. 1.12.2.9 PME# Signal Wake-up Support When the PME# signal on the PCI bus is asserted, the computer wakes from ACPI S1, S3, S4, or S5 states (with Wake on PME enabled in BIOS). 15 The location of the standby power indicator LED is product dependent. For information, refer to the Product Supplement Document for your Desktop Board. 36