Intel D845GLLY D845GL_Boards_TechProdSpec - Page 29
Hardware Management Subsystem
View all Intel D845GLLY manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Product Description 1.10.1 Intel® 82562ET Platform LAN Connect Device The Intel 82562ET component provides an interface to the back panel RJ-45 connector with integrated LEDs. The Intel 82562ET provides the following functions: • Basic 10/100 Ethernet LAN connectivity • Supports RJ-45 connector with status indicator LEDs on the back panel • Full device driver compatibility • ACPI support • Programmable transit threshold • EEPROM that contains the MAC address 1.10.2 RJ-45 LAN Connector with Integrated LEDs Two LEDs are built into the RJ-45 LAN connector. Table 9 describes the LED states when the board is powered up and the LAN subsystem is operating. Table 9. LAN Connector LED States LED Color Green Yellow LED State Off On Off On (steady state) On (brighter and pulsing) Condition 10 Mbit/sec data rate is selected. 100 Mbit/sec data rate is selected. LAN link is not established. LAN link is established. The computer is communicating with another computer on the LAN. 1.10.3 LAN Subsystem Software LAN software and drivers are available from Intel's World Wide Web site. For information about Refer to Obtaining LAN software and drivers Section 1.2, page 12 1.11 Hardware Management Subsystem The hardware management features enable the boards to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including the following: • Fan monitoring (through the I/O controller) • Chassis intrusion detection For information about The WfM specification Refer to Section 1.4, page 13 29