Intel D845GLLY D845GL_Boards_SpecUpdate09 - Page 27

Specification Update for Intel Desktop Boards Using the Intel 845GL Chipset DOCUMENTATION CHANGES The Documentation Changes listed in this section apply to the Technical Product Specification for Intel  Desktop Boards using the Intel  845GL Chipset (Order Number A90788). All Documentation Changes will be incorporated into a future version of that specification. 1. Change to Description of Section 3.8.2, Network Boot The following note will be added to Section 3.8.2, Network Boot: # INTEGRATOR'S NOTE The F12 key may be disabled during POST by assigning a Supervisor Password and setting the User Access Level to a value other than Full. For information about Refer to Supervisor Password and User Access Level Section 4.5, page 68 2. Change to Description of Section 3.8.4, Changing the Default Boot Device During POST The following note will be added to Section 3.8.4, Changing the Default Boot Device During POST: # INTEGRATOR'S NOTE The F10 key may be disabled during POST by assigning a Supervisor Password and setting the User Access Level to a value other than Full. For information about Refer to Supervisor Password and User Access Level Section 4.5, page 68 3. Removed Note That Specifies USB 2.0 Support Limited to Windows* 2000 and Windows XP From Section 1.7.2, USB The following note will be removed in its entirety from Section 1.7.2, USB: ✏ NOTE USB 2.0 support has been tested with Windows 2000 and Windows XP drivers and is not currently supported by any other operating system. 21