Intel D845GVAD2 Product Guide - Page 28

Setting the BIOS Configuration Jumper Block, Table 4.

Get Intel D845GVAD2 - P4 Socket 478 ATX Motherboard PDF manuals and user guides
UPC - 735858157902
View all Intel D845GVAD2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Intel Desktop Board D845GVAD2 Product Guide Setting the BIOS Configuration Jumper Block Figure 9 shows the location of the BIOS configuration jumper block (J9H2). 31 J9H2 OM14572 Figure 9. Location of the BIOS Configuration Jumper Block The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup. Table 4 shows the jumper settings for the Setup program modes. Table 4. Jumper Settings for the BIOS Setup Program Modes (J9H2) Jumper Setting 31 31 31 Mode Normal (default) (1-2) Description The BIOS uses the current configuration and passwords for booting. Configure (2-3) After the Power-On Self-Test (POST) runs, the BIOS displays the Maintenance Menu. Use this menu to clear passwords. Recovery (None) Recovers BIOS from a diskette in the event of a failed BIOS update. 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
Intel Desktop Board D845GVAD2 Product Guide
28
Setting the BIOS Configuration Jumper Block
Figure 9 shows the location of the BIOS configuration jumper block (J9H2).
OM14572
3
1
J9H2
Figure 9.
Location of the BIOS Configuration Jumper Block
The three-pin BIOS jumper block enables all board configurations to be done in BIOS Setup.
Table 4 shows the jumper settings for the Setup program modes.
Table 4.
Jumper Settings for the BIOS Setup Program Modes (J9H2)
Jumper Setting
Mode
Description
3
1
Normal (default)
(1-2)
The BIOS uses the current configuration and passwords for booting.
3
1
Configure
(2-3)
After the Power-On Self-Test (POST) runs, the BIOS displays the
Maintenance Menu.
Use this menu to clear passwords.
3
1
Recovery
(None)
Recovers BIOS from a diskette in the event of a failed BIOS update.