Intel D945GNT Product Specification - Page 11
Manufacturing Options - front panel connectors
View all Intel D945GNT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Product Description 1.1.2 Manufacturing Options Table 2 describes the manufacturing options. Not every manufacturing option is available in all marketing channels. Please contact your Intel representative to determine which manufacturing options are available to you. Table 2. Manufacturing Options Audio Subsystem Intel® High Definition Audio subsystem in one of the following configurations: • 8-channel (7.1) audio subsystem with five analog audio outputs and two S/PDIF digital audio outputs (coaxial and optical) using the Sigmatel* 9223 audio codec • 6-channel (5.1) audio subsystem with three analog audio outputs using the Sigmatel 9220 audio codec Auxiliary fan connector Additional fan connector for use in larger chassis IEEE-1394a Interface IEEE-1394a controller and three IEEE-1394a connectors (one back panel connector, two front-panel connectors) LAN subsystem The board provides one of the following: • Gigabit (10/100/1000 Mbits/sec) LAN subsystem using the Intel® 82573E/82573V/82574V Gigabit Ethernet Controller • 10/100 Mbits/sec LAN subsystem using the Intel® 82562GX/82562GZ Platform LAN Connect (PLC) device SATA RAID Intel® 82801GR I/O Controller Hub (ICH7-R) for RAID support (levels 0,1, 0+1, and 5) on the SATA interface SCSI Hard Drive Activity LED Connector Allows add-in hard drive controllers (SCSI or other) to use the same LED as the onboard IDE controller Trusted Platform Module (TPM), revision 1.2 A component that enhances platform security For information about Available configurations for the board Refer to Section 1.2, page 15 11