Intel DG33TL Product Guide - Page 47
Installing the External Serial ATA Adapter Bracket
View all Intel DG33TL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Installing and Replacing Desktop Board Components Installing the External Serial ATA Adapter Bracket If you are connecting the external Serial ATA (eSATA) adapter bracket to the Desktop Board, follow these instructions (see Figure 22): 1. Observe the precautions in "Before You Begin" on page 27. 2. Attach the connector at the end of the adapter cable to the red SATA connector (Figure 22, B) on the Desktop Board. 3. Secure the bracket to the chassis back panel with a screw (Figure 22, A). NOTE Do not use the red external SATA (eSATA) connector to connect to an internal SATA drive. Figure 22. Connecting the External Serial ATA Adapter Bracket 47
Installing and Replacing Desktop Board Components
47
Installing the External Serial ATA Adapter
Bracket
If you are connecting the external Serial ATA (eSATA) adapter bracket to the Desktop
Board, follow these instructions (see Figure 22):
1.
Observe the precautions in “Before You Begin” on page 27.
2.
Attach the connector at the end of the adapter cable to the red SATA connector
(Figure 22, B) on the Desktop Board.
3.
Secure the bracket to the chassis back panel with a screw (Figure 22, A).
NOTE
Do not use the red external SATA (eSATA) connector to connect to an internal
SATA drive.
Figure 22.
Connecting the External Serial ATA Adapter Bracket