Intel DH57JG Product Specification - Page 21
Legacy I/O Controller, Audio Subsystem - windows 10
View all Intel DH57JG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Product Description 1.10 Legacy I/O Controller The Legacy I/O Controller provides the following features: • One serial port • Serial IRQ interface compatible with serialized IRQ support for PCI Conventional bus systems • Intelligent power management, including a programmable wake-up event interface The BIOS Setup program provides configuration options for the Legacy I/O controller. 1.10.1 Serial Port The serial port is implemented as a 10-pin header on the board. The serial port supports data transfers at speeds up to 115.2 kbits/sec with BIOS support. For information about The location of the serial port header Refer to Figure 10, page 41 1.11 Audio Subsystem The board supports Intel High Definition Audio through the Realtek ALC889 audio codec as well as through the HDMI interface. The ALC889-based audio subsystem supports the following features: • Advanced jack sense for the back panel audio jacks that enables the audio codec to recognize the device that is connected to an audio port. • Stereo input and output via back panel jacks • Headphone and Mic in functions for front panel audio jacks • 108dB Signal-to-Noise ratio (SNR) playback (DAC) quality and 104dB SNR recording (ADC) quality • Content Protection for Full Rate loss-less DVD Audio and Blu-ray Disc* audio content playback (with selected versions of media player software) The audio subsystem supports the following audio interfaces: • 7.1 analog back panel audio connectors • Optical S/PDIF-out audio connector • S/PDIF header (support for optical or coaxial S/PDIF output) • Front panel audio header with support for Intel High Definition Audio (Intel HD Audio) and AC '97 audio NOTE Systems built with an AC '97 audio front panel will not be able to obtain the Microsoft Windows Vista logo. 21