Intel DH57JG Product Specification - Page 26

Real-Time Clock Subsystem, Hardware Management Subsystem - cpu

Get Intel DH57JG PDF manuals and user guides View all Intel DH57JG manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Intel Desktop Board DH57JG Technical Product Specification 1.13 Real-Time Clock Subsystem A coin-cell battery (CR2032) powers the real-time clock and CMOS memory. When the computer is not plugged into a wall socket, the battery has an estimated life of three years. When the computer is plugged in, the standby current from the power supply extends the life of the battery. The clock is accurate to ± 13 minutes/year at 25 ºC with power applied via the power supply 5V STBY rail. NOTE If the battery and AC power fail date and time values will be reset and the user will be notified during the POST. When the voltage drops below a certain level, the BIOS Setup program settings stored in CMOS RAM (for example, the date and time) might not be accurate. Replace the battery with an equivalent one. Figure 1 on page 11 shows the location of the battery. 1.14 Hardware Management Subsystem The hardware management features enable the board to be compatible with the Wired for Management (WfM) specification. The board has several hardware management features, including the following: • Hardware monitoring and fan control • Fan Monitoring • Chassis intrusion detection • Thermal monitoring 1.14.1 Hardware Monitoring and Fan Control The features of the hardware monitoring and fan control include: • Intel Quiet System Technology, delivering acoustically-optimized thermal management • Thermal sensors in the processor and PCH, as well as near the CPU voltage regulators and system memory • Monitoring of five system voltages (+5 V, +12 V, +3.3 V, Memory V-SM and +VCCP) to detect levels above or below acceptable values • Thermally monitored closed-loop fan control for all fans that can adjust fan speed as needed 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
Intel Desktop Board DH57JG Technical Product Specification
26
1.13
Real-Time Clock Subsystem
A coin-cell battery (CR2032) powers the real-time clock and CMOS memory.
When
the computer is not plugged into a wall socket, the battery has an estimated life of
three years.
When the computer is plugged in, the standby current from the power
supply extends the life of the battery.
The clock is accurate to
±
13 minutes/year at 25 ºC with power applied via the power
supply 5V STBY rail.
NOTE
If the battery and AC power fail date and time values will be reset and the user will be
notified during the POST.
When the voltage drops below a certain level, the BIOS Setup program settings stored
in CMOS RAM (for example, the date and time) might not be accurate.
Replace the
battery with an equivalent one.
Figure 1 on page 11 shows the location of the battery.
1.14
Hardware Management Subsystem
The hardware management features enable the board to be compatible with the Wired
for Management (WfM) specification.
The board has several hardware management
features, including the following:
•
Hardware monitoring and fan control
•
Fan Monitoring
•
Chassis intrusion detection
•
Thermal monitoring
1.14.1
Hardware Monitoring and Fan Control
The features of the hardware monitoring and fan control include:
•
Intel Quiet System Technology, delivering acoustically-optimized thermal
management
•
Thermal sensors in the processor and PCH, as well as near the CPU voltage
regulators and system memory
•
Monitoring of five system voltages (+5 V, +12 V, +3.3 V, Memory V-SM and
+V
CCP
) to detect levels above or below acceptable values
•
Thermally monitored closed-loop fan control for all fans that can adjust fan speed
as needed