Intel DQ57TM Intel Desktop Board DQ57TM Product Guide English - Page 15
Intel® Q57 Express Chipset, Main Memory
View all Intel DQ57TM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Desktop Board Features Intel® Q57 Express Chipset The Intel Q57 Express Chipset, consisting of the Intel Q57 Platform Controller Hub (PCH), provides interfaces to the processor and the USB, SATA, LPC, audio, network, display, PCI, and PCI Express x1 interfaces. The PCH is a centralized controller for the board's I/O paths. Main Memory NOTE To be fully compliant with all applicable Intel ® SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. If your memory modules do not support SPD, you will see a notification to this effect on the screen at power up. The BIOS will attempt to configure the memory controller for normal operation. The board has four DIMM sockets and supports the following memory features: • Two independent memory channels with interleaved mode support • Support for non-ECC, unbuffered, single-sided or double-sided DIMMs with x8 organization • Support for ECC unbuffered memory when used with an Intel Xeon 3400-series processor • 16 GB maximum total system memory (with 2 Gb memory technology) • Minimum total system memory: 1 GB using 1 Gb x8 modules • Serial Presence Detect • DDR3 1333 MHz and DDR3 1066 MHz SDRAM DIMMs NOTE 32-bit operating systems are limited to a maximum of 4 GB of memory. These operating systems will report less than 4 GB because of the memory used by add-in graphics cards and other system resources. NOTE When using a processor without Intel® Graphics Technology, memory must be installed in either or both of the DIMM 0 (blue) memory sockets for the system to boot. 15