Intel DQ57TM Intel Desktop Board DQ57TM Product Guide English - Page 62

Connecting Power Supply Cables

Get Intel DQ57TM PDF manuals and user guides View all Intel DQ57TM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Intel Desktop Board DQ57TM Product Guide Connecting Power Supply Cables CAUTION Failure to use an appropriate power supply and/or not connecting the 12 V power connector (Figure 29, A) to the Desktop Board may result in damage to the board or the system may not function properly. Figure 29 shows the location of the power connectors. The 2 x 12 pin main power connector (Figure 29, B) is backwards compatible with ATX12V power supplies with 2 x 10 connectors. NOTE If your power supply has a 2 x 10 main power connector, it is recommended that you do not install a PCI Express x16 graphics card unless it has a direct connection to the power supply. Figure 29. Connecting Power Supply Cables 1. Observe the precautions in "Before You Begin" on page 35. 2. Connect the 12 V processor core voltage power supply cable to the 2 x 2 pin connector (Figure 29, A). 3. Connect the main power supply cable to the 2 x 12 pin connector (Figure 29, B). 62

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Intel Desktop Board DQ57TM Product Guide
62
Connecting Power Supply Cables
CAUTION
Failure to use an appropriate power supply and/or not connecting the 12 V power
connector (Figure 29, A) to the Desktop Board may result in damage to the board or
the system may not function properly.
Figure 29 shows the location of the power connectors. The 2 x 12 pin main power
connector (Figure 29, B) is backwards compatible with ATX12V power supplies with
2 x 10 connectors.
NOTE
If your power supply has a 2 x 10 main power connector, it is recommended that you
do not install a PCI Express x16 graphics card unless it has a direct connection to the
power supply.
Figure 29.
Connecting Power Supply Cables
1.
Observe the precautions in "Before You Begin" on page 35.
2.
Connect the 12 V processor core voltage power supply cable to the 2 x 2 pin
connector (Figure 29, A).
3.
Connect the main power supply cable to the 2 x 12 pin connector (Figure 29, B).