Intel JBOD2000 Intel Storage System JBOD2000 Family Service Guide
Intel JBOD2000 Manual
 |
View all Intel JBOD2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Intel JBOD2000 manual content summary:
- Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 1
Intel® Storage System JBOD 2000 Family Service Guide A Guide for Technically Qualified Assemblers of Intel® identified Subassemblies/Products Revision 1.0 Order Number: G85063-001 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 2
Intel Xeon are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the United States and other countries. * Other names and brands may be claimed as the property of others. Copyright © 2012 Intel Corporation. All Rights Reserved. ii Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 3
el Intel® Server Deployment Toolkit 3.0 CD y/o en http://www.intel.com/support/motherboards/server/sb/cs-010770.htm. http://www.intel.com/support/motherboards/server/sb/cs-010770.htm 上的 Intel® Server Boards and Server Chassis Safety Information（《Intel Intel® JBOD 2U System Service Guide iii - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 4
you are using this guide or any other resource as a reference, pay close attention to the safety instructions. You must adhere to the assembly instructions in this guide to ensure and available but not the board wrapper. Do not slide board over any surface. iv Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 5
troubleshooting information, and instructions on how to add and replace components on the Intel® JBOD 2000 Family System products. For the latest revision of this manual, go to http://www.intel.com/support. Manual Organization Chapter 1 provides a brief overview of the Intel® JBOD 2000 Family System - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 6
Removing the Rack Handles 24 Installing and Removing the Storage Front Panel 24 Installing the Storage Front Panel 24 Removing the Storage Front Panel 25 Appendix A: Technical Reference 27 Power Supply Input Voltages 27 Power Supply Output Voltages 27 vi Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 7
Table of Contents System Environmental Specifications 27 Appendix B: Regulatory and Compliance Information 29 Appendix C: Getting Help 30 Warranty Information 30 Intel® JBOD 2U System Service Guide vii - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 8
- Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 9
Cable Management Arm - Intel Product Code - AXX1U2UCMA (*supported with AXXPRAIL only) 2-post fixed mount bracket kit - Intel Product Code - AXX2POSTBRCKT Single 36 Port Expander (single port backplane SKU) Dual 36 Port Expander (dual port backplane SKU) Intel® JBOD 2U System Service Guide 1 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 10
chassis cover to assist in identifying components. Figure 2. Intel® JBOD System Family Components Hot Swap Hard Drive Bay and Front Panel Options Figure 3. 3.5" Hard Drive Bay - 12 Drive Configuration Figure 4. 2.5" Hard Drive Bay - 24 Drive Configuration 2 Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 11
F System Status LED Non-functional G Power Button w/Integrated LED Non-functional H Non-functional Non-functional I Non-functional Non-functional J Non-functional Figure 5. Front Panel Options Back Panel Figure 6. Back Panel Feature Identification Intel® JBOD 2U System Service Guide 3 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 12
maximum number of hard disk drives, see Table for details : Intel® JBOD System Supported Hard Drive Type Maximun Hard Drive Number JBOD2224S2D 2.5 inch 24 JBOD2224S2S 2.5 inch 24 JBOD2312S2S 3.5 inch 12 . For instructions on installing hard drives, see "Installing a Hot-swap Hard Disk - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 13
System Features 12 x 3.5-inch Hard Drive Backplane A SAS/SATA Hot-swap Connectors Figure 8. 12 x 3.5-inch Hard Drive Backplane Connectors C I2C Connector Figure 9. 12 x 3.5-inch Hard Drive Backplane Components (Rear View) 8 x 2.5-inch Hard Drive Backplane Intel® JBOD 2U System Service Guide 5 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 14
Power Connector Figure 11. 8 x 2.5-inch Hard Drive Backplane Components (Rear View) 36-Port Internal Intel® RAID Expander Card Figure 12. Internal Intel® RAID Expander Cards Components (Top View) A Power Connector B Mini-SAS Connector A C Mini-SAS Connector B 6 Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 15
D Mini-SAS Connector G E Mini-SAS Connector H F Mini-SAS Connector I G Mini-SAS Connector F H Mini-SAS Connector E I Mini-SAS Connector D J Mini-SAS Connector C System Features Intel® JBOD 2U System Service Guide 7 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 16
the beginning of this manual. Note: Whenever you service the system, you must first System Reference All references to left, right, front, top, and bottom assume the reader is facing the front of the chassis as it would be positioned for normal operation. . 8 Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 17
Upgrades Cable Routing When you add or remove components from your JBOD, make sure your cables are routed correctly before reinstalling the system cover. Use caution to make sure no cables or wires are pinched and that the airflow from the fans is not blocked. Intel® JBOD 2U System Service Guide 9 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 18
to determine the proper fan connections. Figure 13. System Fan Order Removing and Installing the Front Bezel Removing the Front Bezel If your system includes a front bezel, follow these steps to remove see letter "B"). Figure 14. Removing the Front Bezel 10 Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 19
into place (see letter "B"). 3. Lock the bezel if needed. Figure 15. Installing the Front Bezel Intel also provides an optional plastic badge for customer to use. To install the badge to the bezel, attach then remove the badge from the bezel (see letter "B"). Intel® JBOD 2U System Service Guide 11 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 20
badge from the front bezel Removing and Installing the System Cover Removing the System Cover The JBOD system must be operated with the system cover in place to ensure proper cooling. You see letter "A"). 5. Slide cover back and lift upward (see letter "B"). 12 Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 21
cover (see letter "A"). 2. Tighten the four screws (see letter "B"). Figure 19. Installing the System Cover Installing a Hot-swap Hard Disk Drive Caution: If you don't install all drives, empty bracket and remove the HDD interface bracket (see letter "C"). Intel® JBOD 2U System Service Guide 13 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 22
lever open, insert the hard disk drive assembly into the chassis (see letter "E"). Push in the lever to lock it into place (see letter "F"). 14 Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 23
3. Install the hard disk drive using the four screws as shown. Make sure the connector end of the drive matches the backplane connector (see letter "E"). Intel® JBOD 2U System Service Guide 15 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 24
. Removing the filler panel - If a power supply is installed, push the green latch in the direction shown while pulling the power supply out of the system by the handle. 16 Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 25
the filler panel Installing and Removing the SAS Expander Removing the SAS Expander 1. Disconnect all cables from the SAS Expander and remember the connection locations. Intel® JBOD 2U System Service Guide 17 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 26
. Installing the SAS Expander 1. Place the SAS Expander into the JBOD system (see letter "A") 2. Secure the SAS Expander with three screws (see letter "B"). Figure 34. Installing the AS Expander 3. Connect all cables back into the SAS Expander connectors. 18 Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 27
fan straight up to remove it from the fan holder. 2. Replace the system fan. Figure 35. Replacing a system fan Replacing the Backplane Replacing the 3.5" Hard Drive Backplane Removing the 3.5" . Removing 3.5" hard drive backplane - remove the hard drive cage Intel® JBOD 2U System Service Guide 19 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 28
Position the backplane in place at the front of the server system (see letter "A"). 2. Slide the backplane into the server system guides (see letter "B"). 3. Secure the backplane with the screw Secure the hard drive cage with the six screws (see letter "E"). 20 Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 29
cables from the backplane. 2. Remove the six screws to release the stiffener (see letter "A"). 3. Slide the stiffener cage out of the server chassis (see letter "B"). Intel® JBOD 2U System Service Guide 21 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 30
letter "A"). Slide the backplane board in the direction shown to lock it in place (see letter "B"). 2. Secure the backplane with the screw (see letter "C"). 22 Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 31
Routing". Installing and Removing the Rack Handles Installing the Rack Handles Align the rack handle with the two holes on the side of the server system and attach the rack handle to the server system with two screws as shown. Intel® JBOD 2U System Service Guide 23 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 32
remove the rack handle from the server system as shown. Figure 48. Removing the Rack Handle Installing and Removing the Storage Front Panel Installing the Storage Front Panel 1. Align the inteposer card (see letter "C"). See Cable Routing for more details. 24 Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 33
the storage front panel from the rack handle (see letter "B"); Figure 51. Installing the storage front panel 3. Disconnect all the cables from the interposer card (see letter "C"); 4. Remove the two screws to release the storage front panel (see letter "D"); Intel® JBOD 2U System Service Guide 25 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 34
storage front panel from the side wall of server chassis (see letter "E"); Figure 52. Installing the interposer card 6. Connect the front panel control cable from mother board to the standard front control panel if needed. See Cable Routing for more details. 26 Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 35
in height 24 inches (≧40 lbs to < 80 lbs) Vibration, unpackaged ESD 5 Hz to 500 Hz, 2.20 g RMS random +/-12 KV except I/O port +/- 8 KV per Intel® Environmental test specification Intel® JBOD 2U System Service Guide 27 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 36
Appendix A: Technical Reference Parameter System Cooling Requirement in BTU/Hr 460 Watt Max - 1570 BTU/hour Limits 28 Intel® JBOD 2U System Service Guide - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 37
Information Please refer to the Server Products Regulatory and Safety document for the product regulatory compliance reference. The document can be downloaded from http://www.intel.com/support/server. Intel® JBOD 2U System Service Guide 29 - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 38
latest and most complete technical support information on all Intel Enterprise Server and Storage Platforms. Information available at the support site includes: - Latest BIOS, firmware, drivers and utilities - Product documentation, installation and quick start guides - Full product specifications - Intel JBOD2000 | Intel Storage System JBOD2000 Family Service Guide - Page 39
Appendix D: Intel® Server Issue Report Form Intel® JBOD 2U System Service Guide 31
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
 |
 |
Intel
®
Storage System JBOD 2000 Family
Service Guide
A Guide for Technically Qualified Assemblers of Intel
®
identified Subassemblies/Products
Revision 1.0
Order Number: G85063-001