Intel JBOD2000 Intel Storage System JBOD2000 Family Service Guide - Page 23

Installing a Hard Disk Drive

Get Intel JBOD2000 PDF manuals and user guides View all Intel JBOD2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Hardware Installations and Upgrades Figure 24. Installing Hard Disk Drive - Inserting 3.5" HDD assembly Installing a Hard Disk Drive into 2.5" Hard Drive Carrier 1. Remove the drive carrier by pressing the green latch to unlock (see letter "A"). Pull out the black lever and slide the carrier out (see letter "B"). Figure 25. Installing Hard Disk Drive - Removing 2.5" HDD carrier 2. Remove the four screws securing the plastic drive blank from the 2.5" HDD carrier (see letter "C"). Disengage the plastic drive blank from the HDD carrier. Remove the plastic drive blank from the 2.5" HDD carrier (see letter "D"). Figure 26. Installing Hard Disk Drive - Removing plastic drive blank 3. Install the hard disk drive using the four screws as shown. Make sure the connector end of the drive matches the backplane connector (see letter "E"). Intel® JBOD 2U System Service Guide 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
Hardware Installations and Upgrades
Intel
®
JBOD 2U System Service Guide
15
Figure 24. Installing Hard Disk Drive
–
Inserting 3.5” HDD assembly
Installing a Hard Disk Drive
into 2.5” Hard Drive Carrier
1.
Remove the drive carrier by pressing the green latch
to unlock (see letter “A”). Pull out the
black lever and slide
the carrier out (see letter “B”)
.
Figure 25. Installing Hard Disk Drive
–
Removing 2
.5” HDD carrier
2.
Remove the four screws securing the plastic drive blank from the 2.5" HDD carrier (see letter
“
C
”).
Disengage the plastic drive blank from the HDD carrier. Remove the plastic drive blank
from the 2.5" HDD carrier (see letter “
D
”).
Figure 26. Installing Hard Disk Drive
–
Removing plastic drive blank
3.
Install the hard disk drive using the four screws as shown. Make sure the connector end of the
drive matches the
backplane connector (see letter “
E
”).