Intel JBOD2000 Intel Storage System JBOD2000 Family Service Guide - Page 20

Hardware Installations and Upgrades Figure 17. Removing the badge from the front bezel Removing and Installing the System Cover Removing the System Cover The JBOD system must be operated with the system cover in place to ensure proper cooling. You will need to remove the top cover to add or replace components inside the system. Before removing the top cover, power down the server and unplug all peripheral devices and the power cable(s). Note: A non-skid surface or a stop behind the server system may be needed to prevent the server system from sliding on your work surface. 1. Observe the safety and ESD precautions at the beginning of this book. 2. Turn off all peripheral devices connected to the server. Turn off the server. 3. Disconnect the power cord. 4. Remove the four screws (see letter "A"). 5. Slide cover back and lift upward (see letter "B"). 12 Intel® JBOD 2U System Service Guide