Intel JBOD2000 Intel Storage System JBOD2000 Family Service Guide - Page 22

Installing Hard Disk Drive, Installing Hard Disk Drive, Installing

Get Intel JBOD2000 PDF manuals and user guides View all Intel JBOD2000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

Hardware Installations and Upgrades Figure 21. Installing Hard Disk Drive - Removing 3.5" HDD interface bracket 3. Install the hard disk drive using the same four screws as shown. Make sure the connector end of the drive matches the backplane connector (see letter "D"). Figure 22. Installing Hard Disk Drive - Installing 3.5" HDD For installing 2.5" Hard Disk Drive as option: Break off the tab on the HDD interface bracket (see letter "d1").Install the HDD interface bracket from top. Secure the bracket with three screws as shown (see letter "d2"). Slide the 2.5" HDD into the bracket to align the screw holes with the right and left rail (see letter "d3"). Secure the hard disk drive using the four screws for 2.5" HDD (see letter "d4"). Figure 23. Installing Hard Disk Drive - Installing 2.5" HDD 4. With the lever open, insert the hard disk drive assembly into the chassis (see letter "E"). Push in the lever to lock it into place (see letter "F"). 14 Intel® JBOD 2U System Service Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
Hardware Installations and Upgrades
14
Intel
®
JBOD 2U System Service Guide
Figure 21. Installing Hard Disk Drive
–
Removing 3.5” HDD interface bracket
3.
Install the hard disk drive using the same four screws as shown. Make sure the connector end of
the drive matches the backplane connector (see letter “D”).
Figure 22. Installing Hard Disk Drive
–
Installing 3.5” HDD
For installing
2.5” Hard Disk Drive as option:
Break off the tab on the HDD interface bracket (see letter “d1”).Install the HDD interface
bracket from top. Secure the bracket with three screws as show
n (see letter “d2”). Slide the 2.5"
HDD into the bracket to align the screw holes with the right and left rail (see letter “d3”). Secure
the hard disk drive using the four screws for 2.5" HDD (see letter “d
4
”).
Figure 23. Installing Hard Disk Drive
–
Installing 2.5” HDD
4.
With the lever open, insert the hard disk drive assembly into the chassis (see letter “E”). Push in
the lever to lock it into place (see letter “F”).