Intel JBOD2000 Intel Storage System JBOD2000 Family Service Guide - Page 21
Installing a Hot-swap Hard Disk Drive
View all Intel JBOD2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Hardware Installations and Upgrades Figure 18. Removing the System Cover Installing the System Cover 1. Place system cover onto the chassis and slide forward to engage recessed edge at the front of the cover (see letter "A"). 2. Tighten the four screws (see letter "B"). Figure 19. Installing the System Cover Installing a Hot-swap Hard Disk Drive Caution: If you don't install all drives, empty drive bays must be occupied by carriers with plastic drive blank provided to maintain proper system cooling. Installing a Hard Disk Drive into 3.5" Hard Drive Carrier 1. Remove the drive carrier by pressing the green button and opening the lever (see letter "A"). Slide the carrier out (see letter "B"). Figure 20. Installing Hard Disk Drive - Removing 3.5" HDD carrier 2. Remove the four screws securing the HDD interface bracket and remove the HDD interface bracket (see letter "C"). Intel® JBOD 2U System Service Guide 13