Intel S845WD1-E Product Guide - Page 36

Video Memory Interface The memory controller subsystem of the Rage XL arbitrates requests from direct memory interface, the VGA graphics controller, the drawing coprocessor, the display controller, the video scalar, and hardware cursor. Requests are serviced in a manner that ensures display integrity and maximum CPU/coprocessor drawing performance. The S845WD1H supports an 8 MB (512Kx32bitx4 Banks) SDRAM device for video memory. Network Interface Controller (NIC) The S845WD1H server board supports two 10Base-T/100Base-TX Network Interface Controllers (NICs) based on the Intel 82550PM NIC. The 82550PM is a highly integrated PCI LAN controller in a thin BGA 15mm package. The controller's baseline functionality is equivalent to that of the Intel® 82559, with the addition of Alert-on-LAN functionality. The S845WD1H server board supports independent disabling of the two NIC controllers using the BIOS Setup menu. The 82550PM supports the following features: • Glueless 32-bit PCI, CardBus master interface (Direct Drive of Bus), compatible with PCI local Bus Specification, Revision 2.2. • Integrated IEEE 802.3 10Base-T and 100Base-TX compatible PHY. • IEEE 820.3u auto-negotiation support. • Full duplex support at both 10 Mbps and 100 Mbps operation. • Integrated UNDI ROM support. • MDI/MDI-X and HWI support. • Low power +3.3 V device. NIC Connector and Status LEDs The 82550 drives two LEDs located on each network interface connector. The amber LED indicates network connection when on, and transmit/receive activity when blinking. The yellow LED indicates 100-Mbps operation when lit, and 10-Mbps when off. Hardware Monitoring The S845WD1H server board has an integrated Hardware Management ASIC that is responsible for hardware monitoring. Together, the Hardware Management ASIC and the Intel LANDesk Client Manager (LDCM) 6.3 software provide basic server hardware monitoring which alerts a system administrator if a hardware problem occurs on an Intel Server Board S845WD1H based system. The Intel LDCM software is for use with Windows 2000 Server and Windows 2000 Advanced Server operating systems. Other S845WD1H operating systems like Red Hat† Linux† won't be monitored with LDCM. Intel LANDesk Client Manager software and user guides that provide more information on using Intel LDCM software are available on the Intel Server Board S845WD1H Resource CD and are also available for download at: http://www.support.intel.com/support/motherboards/server/S845WD1-E 36 Intel Server Board S845WD1-E (S845WD1H) Product Guide