Intel S845WD1-E Product Guide - Page 50
Setting the BIOS Configuration Jumper
UPC - 735858159272
View all Intel S845WD1-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Setting the BIOS Configuration Jumper CAUTION Always turn off the power and unplug the power cord from the server before changing the jumper. Moving the jumper with the power on may result in unreliable server operation. J6H1 TP00007 Figure 14. BIOS Configuration Jumper Block Location This three-pin jumper block, shown in Figure 14, enables all server board configurations to be done in BIOS Setup. Table 12 shows the jumper settings for the Setup program modes. Table 12. Jumper Settings for the BIOS Setup Program Modes Function/Mode Jumper Setting Configuration Normal 3 1-2 The BIOS uses current configuration information and passwords for booting. 1 Configure 3 2-3 After the POST runs, Setup runs automatically. The maintenance menu is displayed. 1 Recovery 3 None The BIOS attempts to recover the BIOS configuration. A recovery diskette is required. 1 50 Intel Server Board S845WD1-E (S845WD1H) Product Guide