Intel SC5295-E User Guide - Page 42
Installing and Removing a Fixed Hard Drive
View all Intel SC5295-E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Hardware Installations and Upgrades Installing and Removing a Fixed Hard Drive Up to six fixed hard drives can be installed in the fixed hard drive cage that ships with the Entry Server Chassis SC5295-E. Power requirements for each individual hard drive may limit the maximum number of drives that can be integrated into the server chassis. Note: The Entry Server Chassis SC5295-E does not support all hard drives. See "Additional Information and Software" for a web link to a list of supported hard drives. Installing a Fixed Hard Drive Caution: Fixed drives are NOT hot swappable. Before removing or replacing the drive, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. Warning: Drive bay slots 1, 3, and 5 MUST be populated first. Failure to do so could result in thermal issues within the chassis. 1 2 3 4 5 6 TP00955 Figure 23. Drive Bay Slot Order 1. Observe the safety and ESD precautions listed in Appendix A, "Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the left side cover. For instructions, see "Removing the Left Side Cover". 24 Intel® Entry Server Chassis SC5295-E UP/DP/WS/BRP User Guide