Intel SE7230NH1 User Guide - Page 21

Configuration Jumpers - e bios

Get Intel SE7230NH1 PDF manuals and user guides View all Intel SE7230NH1 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Configuration Jumpers CMOS Configuration Jumper (J9H3) 3 A 2 Config Normal Off - Recovery Clear CMOS Jumper (J9G3) B3 2 Clear Normal TP01794 Table 2. Configuration Jumpers Jumper Name CMOS Configuration Clear CMOS What happens at system reset... Pins 1-2 should be jumpered for normal system operation. If pins 2-3 are jumpered, the system will enter a configuration menu that is only available by jumpering these pins. These pins should not be jumpered for normal operation. If the jumper is removed, the system will attempt to recover the BIOS by loading the BIOS code into the flash device from a floppy disk. This is typically used when the BIOS has become corrupted. The jumper should not be removed for normal operation. Pins 1-2 should be jumpered for normal system operation. If pins 2-3 are jumpered, the CMOS settings will be cleared on the next reset. These pins should not be jumpered for normal operation. Intel® Server Board SE7230NH1-E and Intel® Server Platform SR1475NH1-E User's Guide 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
Intel
®
Server Board SE7230NH1-E and Intel
®
Server Platform SR1475NH1-E User’s Guide
5
Configuration Jumpers
Table 2. Configuration Jumpers
Jumper Name
What happens at system reset...
CMOS Configuration
Pins 1-2 should be jumpered for normal system operation.
If pins 2-3 are jumpered, the system will enter a configuration menu
that is only available by jumpering these pins. These pins should
not
be jumpered for normal operation.
If the jumper is removed, the system will attempt to recover the BIOS
by loading the BIOS code into the flash device from a floppy disk.
This is typically used when the BIOS has become corrupted. The
jumper should
not
be removed for normal operation.
Clear CMOS
Pins 1-2 should be jumpered for normal system operation.
If pins 2-3 are jumpered, the CMOS settings will be cleared on the
next reset. These pins should
not
be jumpered for normal operation.
TP01794
3
2
Clear CMOS
Jumper (J9G3)
Clear
Normal
3
2
CMOS Configuration
Jumper (J9H3)
Config
Normal
B
A
Off - Recovery