Intel SE7230NH1 User Guide - Page 29
Hardware Installations and, Upgrades - manual
View all Intel SE7230NH1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
3 Hardware Installations and Upgrades Before You Begin Before working with your server product, pay close attention to the "Safety Information" at the beginning of this manual. Tools and Supplies Needed • Phillips* (cross head) screwdriver (#1 bit and #2 bit) • Needle nosed pliers • Antistatic wrist strap and conductive foam pad (recommended) Installing and Removing Memory The silkscreen on the board for the DIMMs displays DIMM_2B, DIMM_1B, DIMM_2A, DIMM_1A starting from the edge of the board. DIMM_1A is the socket closest to the processor socket. See "Memory" for a discussion of the memory requirements and options. See "Additional Information and Software" for a link to the list of tested DIMMs. Note: The DIMMs being installed must be DDR2 DIMMs (see letter "A" in Figure 3). DDR DIMMs will not physically fit into a server board designed to support DDR2 DIMMs (see letter "B" in Figure 3). Figure 3. DDR vs. DDR2 DIMMs Intel® Server Board SE7230NH1-E and Intel® Server Platform SR1475NH1-E User's Guide 13