Intel SE7320SP2 User Guide - Page 33

Creating a Bootable Diskette, Creating the BIOS Upgrade Diskette, Upgrading the BIOS - memory type

Get Intel SE7320SP2 - 800MHZ Ecc Ddr Xeon PDF manuals and user guides
UPC - 735858168731
View all Intel SE7320SP2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 33 highlights

Server Utilities Creating a Bootable Diskette Use a DOS system to create the diskette as follows: 1. Insert a diskette in diskette drive A. 2. At the C:\ prompt, for an unformatted diskette, type: format a:/s or, for a diskette that is already formatted, type: sys a: 4. Press . Creating the BIOS Upgrade Diskette The BIOS upgrade file is a compressed self-extracting archive that contains the files you need to upgrade the BIOS. 1. Insert the bootable diskette into the diskette drive. 2. While in the directory into which you downloaded the upgrade file(s), type [filename] a: where "[filename]" is the name of the file that you downloaded. This command extracts the update files and places them onto the bootable diskette Upgrading the BIOS 1. Place the bootable diskette containing the BIOS update files into the diskette drive of your system. Boot the system with the diskette in the drive. 2. A menu will appear with two options. Use option 1 to automatically update the system BIOS. Use option 2 to manually update the system BIOS and the User Binary. 3. If you selected option 1, to automatically update the system BIOS: The system will execute the AfuDOS update utility to update the BIOS. When the update is complete, the utility will display a green box with a message that says "Completed Successfully." The system will then reboot. 4. If you selected option 2, to manually update the BIOS or to update the flash memory, you can either select "Update Flash Memory From a File" or "Update System BIOS": ƒ Update Flash Memory From a File: When prompted for a file name, type BIOS.wph and press Enter. ƒ Update System BIOS: The system will warn you that the BIOS will be updated. Verify the BIOS version is correct and press Enter to continue. When the update is complete, the utility will display a green box with a message that says "Completed Successfully." The system will then reboot. 5. Wait while the BIOS files are updated. Do not power down the system during the BIOS update process! The system will reset automatically when the BIOS update process is completed. Remove the diskette from the diskette drive. 6. Check to make sure the BIOS version displayed during POST is the new version as the system reboots. 7. Enter Setup by pressing the F2 key during boot. 8. In Setup, press the F9 and to set the parameters back to default values. Intel Server Board SE7320SP2 / SE7525GP2 User Guide 33

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
Server Utilities
Creating a Bootable Diskette
Use a DOS system to create the diskette as follows:
1.
Insert a diskette in diskette drive A.
2.
At the C:\ prompt, for an unformatted diskette, type:
format a:/
s
or, for a diskette that is already formatted, type:
sys a:
4.
Press <Enter>.
Creating the BIOS Upgrade Diskette
The BIOS upgrade file is a compressed self-extracting archive that contains the files you need to
upgrade the BIOS.
1.
Insert the bootable diskette into the diskette drive.
2.
While in the directory into which you downloaded the upgrade file(s), type
[filename] a:
where “[
filename
]” is the name of the file that you downloaded. This command extracts the
update files and places them onto the bootable diskette
Upgrading the BIOS
1.
Place the bootable diskette containing the BIOS update files into the diskette drive of your
system. Boot the system with the diskette in the drive.
2.
A menu will appear with two options.
Use option 1 to automatically update the system BIOS.
Use option 2 to manually update the system BIOS and the User Binary.
3.
If you selected option 1, to automatically update the system BIOS:
The system will execute the AfuDOS update utility to update the BIOS. When the update is
complete, the utility will display a green box with a message that says “Completed
Successfully.” The system will then reboot.
4.
If you selected option 2, to manually update the BIOS or to update the flash memory, you can
either select “Update Flash Memory From a File” or “Update System BIOS”:
Update Flash Memory From a File: When prompted for a file name, type BIOS.wph and
press Enter.
Update System BIOS: The system will warn you that the BIOS will be updated. Verify the
BIOS version is correct and press Enter to continue. When the update is complete, the
utility will display a green box with a message that says “Completed Successfully.” The
system will then reboot.
5.
Wait while the BIOS files are updated.
Do not power down the system during the BIOS
update process!
The system will reset automatically when the BIOS update process is
completed. Remove the diskette from the diskette drive.
6.
Check to make sure the BIOS version displayed during POST is the new version as the system
reboots.
7.
Enter Setup by pressing the F2 key during boot.
8.
In Setup, press the F9 and <Enter> to set the parameters back to default values.
Intel Server Board SE7320SP2 / SE7525GP2 User Guide
33