Intel SE7320SP2 User Guide - Page 45
Devices are not Recognized under Device Manager (Windows* Op, Hard Drive(s) are not Recognized - raid drivers
UPC - 735858168731
View all Intel SE7320SP2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Troubleshooting Devices are not Recognized under Device Manager (Windows* Operating System) The Windows* operating systems do not include all of the drivers for the Intel® chipsets, onboard NICs, and other components. See "Additional Information and Software" for a link to the current drivers and chipset files. Hard Drive(s) are not Recognized Check the following: Make sure the drive is not disabled in BIOS Setup. Make sure the drive is connected correctly and that is plugged into the power supply. Make sure the drive is compatible. See "Additional Information and Software" for a link to the tested drives. Make sure you have not exceeded the power budget for the server. See "Additional Information and Software" for a link to software to check your power budget. If using SCSI drives, verify that each SCSI ID number is unique on the SCSI bus. See your drive documentation for details on setting the SCSI ID for your drives. If using ATA drives, verify that the master/slave settings are set correctly. See your drive documentation for details on setting the master/slave settings. If using a RAID configuration with SCSI or SATA drives, make sure the RAID card is installed correctly. Bootable CD-ROM Is Not Detected Check the following: Make sure the BIOS is configured to allow the CD-ROM to be the first bootable device. Intel Server Board SE7320SP2 / SE7525GP2 User Guide 45