Intel SE7320VP2 User Guide - Page 26

Installing Memory, When the DIMM is inserted - memory upgrade

Get Intel SE7320VP2 PDF manuals and user guides View all Intel SE7320VP2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

Hardware Installations and Upgrades 4. Remove the server's cover. See the documentation that accompanied your server chassis for instructions on removing the server's cover. 5. Locate the DIMM sockets (see Figure 7). DIMM 2A DIMM 3B DIMM 3A DIMM 2B DIMM 1A DIMM 1B Figure 7. Installing Memory TP00761 6. Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open position. 7. Holding the DIMM by the edges, remove it from its anti-static package. 8. Position the DIMM above the socket. Align the two small notches in the bottom edge of the DIMM with the keys in the socket (see inset in Figure 7). 9. Insert the bottom edge of the DIMM into the socket. 10. When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips snap into place. Make sure the clips are firmly in place. 11. Replace the server's cover and reconnect the AC power cord. See the documentation that accompanied your server chassis for instructions on installing the server's cover. 26

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
Hardware Installations and Upgrades
4.
Remove the server’s cover. See the documentation that accompanied your server chassis for
instructions on removing the server’s cover.
5.
Locate the DIMM sockets (see Figure 7).
TP00761
DIMM 2A
DIMM 3B
DIMM 3A
DIMM 2B
DIMM 1A
DIMM 1B
Figure 7.
Installing Memory
6.
Make sure the clips at either end of the DIMM socket(s) are pushed outward to the open
position.
7.
Holding the DIMM by the edges, remove it from its anti-static package.
8.
Position the DIMM above the socket. Align the two small notches in the bottom edge of the
DIMM with the keys in the socket (see inset in Figure 7).
9.
Insert the bottom edge of the DIMM into the socket.
10.
When the DIMM is inserted, push down on the top edge of the DIMM until the retaining clips
snap into place. Make sure the clips are firmly in place.
11.
Replace the server’s cover and reconnect the AC power cord. See the documentation that
accompanied your server chassis for instructions on installing the server’s cover.
26