Intel SR1530AHLX User Guide - Page 103
Replacing the Front Panel Board, SR1530HAHLX
UPC - 735858189606
View all Intel SR1530AHLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
Replacing the Front Panel Board (SR1530HAHLX) Caution: The control panel is NOT hot swappable. Before removing or replacing the control panel, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. Your server must be operated with a control panel installed. 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. Power down the server and unplug all peripheral devices and the AC power cable. 3. Remove the server system cover. For instructions, see "Removing the Server System Cover" on page 28. 4. Disconnect the front panel cable and the USB cable from the front panel board. 5. Remove the screw that attaches the front panel board to the server system. See letter "A" in the figure below. Save the screw. You will re-install it later. 6. Slide the front panel board back (see letter "B" in the figure below) and lift the front panel board from the system (see letter "C" in the figure below). A B C AF001589 Figure 74. Removing Front Panel Board from the Server System (SR1530HAHLX) Intel® Server System SR1530AH / SR1530AHLX / SR1530HAHLX 81