Intel SR1530AHLX User Guide - Page 99
Replacing the Power Supply SR1530HAHLX
UPC - 735858189606
View all Intel SR1530AHLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Replacing the Power Supply (SR1530HAHLX) Caution: The power supply is NOT hot swappable. Before removing or replacing the power supply, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. The power supply can be replaced if it fails or if one of the fans that is integrated into it fails. To replace the power supply, use the following instructions. 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information" on page iii. 2. Power down the server and unplug all peripheral devices and the AC power cable (see letter "A" in the figure below). 3. Remove the server system cover. For instructions, see "Removing the Server System Cover". 4. Disconnect all power cables connected to the server board and peripherals. 5. Lift up slightly on the front of the power supply until it clears the foot at the bottom of the chassis (see letter "B" in the figure below). 6. Slide the power supply forward (see letter "C" in the figure below) and then lift it from the chassis. A C B AF001630 Figure 70. Removing Power Supply from the Server System (SR1530HAHLX) Intel® Server System SR1530AH / SR1530AHLX / SR1530HAHLX 77