Intel SR1530AHLX User Guide - Page 39
Memory
UPC - 735858189606
View all Intel SR1530AHLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Memory The Intel® Server System SR1530AH / SR1530AHLX / SR1530HAHLX provides four DIMM sockets across two banks, bank 1 and bank 2. Bank 1 consists of DIMM sockets 1A and 1B. Bank 2 consists of DIMM sockets 2A and 2B. A minimum of one 256-MB DIMM is required in DIMM socket 1A. This uses singlechannel interleave. However, for dual-channel interleave, providing optimum performance, a minimum of two DIMMs should be installed in DIMM sockets 1A and 2A. To operate in dual-channel dynamic paging mode, the following conditions must be met: • Populate two identical DIMMs in sockets DIMM1A and DIMM 1B. • Populate four identical DIMMs in each socket location. Note: Installing only three DIMMs is not supported. Use DIMMs that are the same type and speed. Use of identical DIMMs is preferred. DIMMs must meet the following requirements: • Use only DIMMs with DDR2 DRAM technology. • Use only DDR2-533 and DDR2-667 stacked DIMM modules. In determining your memory requirements, the need for memory sparing or memory mirroring must be considered. For a complete list of supported memory DIMMs, see the links under "Server System References" on page x. Intel® Server System SR1530AH / SR1530AHLX / SR1530HAHLX 17