Intel SR1530AHLX User Guide - Page 69
Installing and Removing a Hot-Swap SATA Drive, SR1530HAHLX
UPC - 735858189606
View all Intel SR1530AHLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Installing and Removing a Hot-Swap SATA Drive (SR1530HAHLX) Up to three hot swappable SATA drives can be installed. The HDD0 drive bay is at the left side of the chassis, The HDD1 drive bay is in the middle of the chassis, underneath the optional optical drive. The HDD2 drive bay is at the right side of the chassis. The drives do not need to be installed in order; HDD1 can be installed before HDD0. Cautions: If you install less than three drives or devices, the empty drive bays must be occupied by carriers with baffles to maintain proper system cooling. Note: The server system does not support all hard drives. See "Server System References" on page x for an Internet link to a list of supported hardware. Installing a Hot-Swap SATA Drive (SR1530HAHLX) 1. Remove the front bezel if it is installed. For instructions, see "Removing the Front Bezel". 2. Locate the drive position you want to use. See Figure 38. HDD 0 HDD 1 HDD 2 AF001582 Figure 38. Locating Drive Positions (SR1530HAHLX) Intel® Server System SR1530AH / SR1530AHLX / SR1530HAHLX 47