Intel SR2520SAXR User Guide - Page 53
Installing and Removing Memory
![]() |
UPC - 735858197335
View all Intel SR2520SAXR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Installing and Removing Memory The silkscreen on the board for the DIMMs displays DIMM A1, DIMM A2, DIMM B1, DIMM B2, DIMM C1, DIMM C2, DIMM D1 and DIMM D2 starting from the center of the board. See "Memory" for a discussion of the memory requirements and options. See "Server System References" for a link to the list of tested DIMMs. Note: The Intel® Server System SR2520SAF/SR2520SAFR only has four DIMM sockets. Installing DIMMs To install DIMMs, follow these steps: 1. Observe the safety and ESD precautions in "Safety Information". 2. Turn off all peripheral devices connected to the server. Turn off the server. 3. Disconnect the AC power cord(s) from the server. 4. Remove the system's cover. For instructions, see "Removing the System Cover". 5. Locate the DIMM sockets (see Figure 21). Intel® Server System SR2520SA User's Guide 31
![](/manual_guide/products/intel-sr2520sax-user-guide-9131fdb/53.png)