Intel SR2520SAXR User Guide - Page 76
Replacing the Redundant Power Supply, SR2520SAX/SR2520SAXS and SR2520SAXR, SR2520SAXSR
![]() |
UPC - 735858197335
View all Intel SR2520SAXR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Replacing the Redundant Power Supply (SR2520SAX/SR2520SAXS and SR2520SAXR/ SR2520SAXSR) Caution: The power supply is not hot-swappable. Before removing or replacing the power supply, you must first take the server out of service, turn off all peripheral devices connected to the system, turn off the system by pressing the power button, and unplug the AC power cord from the system or wall outlet. The power supply can be replaced if it fails or if one of the fans that is integrated into it fails. To replace the power supply, use the following instructions. 1. Observe the safety and ESD precautions at the beginning of this book. See "Safety Information". 2. Power down the server and unplug all peripheral devices and the AC power cable(s). 3. Remove the server system cover. For instructions, see "Removing the System Cover". 4. Press the green release latch to disengage the power supply (see letter "A") and remove the power supply by sliding it out of the system (see letter "B") as shown in the figure below. A B AF001455 Figure 42. Removing Power Supply Module from the Server System (SR2520SAX/SR2520SAXS and SR2520SAXR/SR2520SAXSR) 54 Intel® Server System SR2520SA User's Guide
![](/manual_guide/products/intel-sr2520sax-user-guide-9131fdb/76.png)