Intel SRCU42L User Guide - Page 29
Firmware Update Procedure via XROM StorCon - download
UPC - 735858157872
View all Intel SRCU42L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Flash Memory Programming Flash Memory Programming A A.1 Firmware Update Procedure via XROM StorCon The Storage Console (StorCon) is a full-featured monitoring and configuration utility with a text-based user interface. StorCon manages all aspects of the RAID subsystem as well as many features of the RAID adapter. Refer to the Software Guide for more details about StorCon. You can use StorCon to update the firmware image. The menu option, Firmware Update, allows you to update the firmware, BIOS and XROM StorCon currently programmed on the flash memory of the RAID controller. Because the Flash-RAM can be reprogrammed many times, the software modules can be easily updated, without having to remove the controller from its PCI slot. The firmware, BIOS and XROM StorCon are part of the file, SRC_RXFW.xxx, where the file extension xxx indicates the version stepping. The current firmware file can be found on the RAID Software Suite CD-ROM. To get the latest firmware for the RAID controller, visit our website at: http://support.Intel.com. Note: The Firmware Update option is not available when StorCon is accessing the RAID Controller remotely. Follow the procedure below to update the firmware via XROM StorCon. 1. Download the firmware image containing the latest programs/drivers from the website. Format a 3.5" HD disk (1.44MB) and copy the SRC_RXFW file onto the disk. 2. With the adapter installed in the system, boot the computer and press + when prompted to enter the BIOS version of StorCon. 3. Select the applicable RAID controller and press . 4. If the Express Setup menu is displayed, press to display the Advanced Setup menu. Select the menu option, Configure Controller and press . Insert the floppy containing the latest firmware file into the floppy disk drive. 5. From the Configure Controller submenu, select Firmware Update and press . 6. XROM StorCon automatically searches for the firmware file from the floppy drive, a:\. After finding the file, StorCon displays the name, description and version of the firmware. Press . 7. StorCon reads and checks the firmware file, then displays a warning. Press to confirm the firmware update. 8. StorCon programs the flash eprom. Hardware Installation and User's Guide 29