Intel SSR212MC2 Hardware Technical Product Specification - Page 37

Intel, Server Board S5000PSL

Get Intel SSR212MC2 - Storage Server Hard Drive Array PDF manuals and user guides
UPC - 735858199094
View all Intel SSR212MC2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 37 highlights

Intel® Storage Server SSR212MC2 8 BTN_PWR+ 9 GND 10 REM_D+ 11 REM_D12 GND 13 USB_PWR 14 GND 15 USB_D+ 16 USB_D17 GND 18 +5VSB System Interconnection Power Switch terminal 2 Ground remote sensor positive side remote sensor negative side Ground USB +5V Power Ground USB differential Data + USB differential Data - Ground +5V Stand-By Power 6.1.3 6.1.3.1 Intel® Server Board S5000PSL One USB Header locted under the Boot Drive Enclosure. If this header is to be used for an internal boot DOM, etc., the Front Panel mini-USB cable must be removed from the header, thus disabling the Front Panel miniUSB port. Samtec TSW-105-07-T-S-004 Header, 5 way, 0.1" pitch, vertical, Pin 4 keyed, PIH. Table 19: USB 2.0 Connector Pin Signal Name 1 USB_PWR 2 USB_D- 3 USB_D+ - - 5 GND 6.1.4 6.1.4.1 NOTE: the Boot Drive Enclosure must be removed to access the USB header. Intel® RAID Controller SRCSAS144E One Battery Backup connector cable that provides connectivity between the Intel® RAID Controller SRCSAS144E and the Battery Backup Unit (BBU) mounted in the PCI Slot 6 position. Revision 1.2 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
Intel® Storage Server SSR212MC2
System Interconnection
Revision 1.2
29
8
BTN_PWR+
Power Switch terminal 2
9
GND
Ground
10
REM_D+
remote sensor positive side
11
REM_D-
remote sensor negative side
12
GND
Ground
13
USB_PWR
USB +5V Power
14
GND
Ground
15
USB_D+
USB differential Data +
16
USB_D-
USB differential Data –
17
GND
Ground
18
+5VSB
+5V Stand-By Power
6.1.3
Intel
®
Server Board S5000PSL
6.1.3.1
One USB Header locted under the Boot Drive Enclosure. If this header is
to be used for an internal boot DOM, etc.,
the Front Panel mini-USB cable
must be removed from the header, thus disabling the Front Panel mini-
USB port.
Samtec TSW-105-07-T-S-004 Header, 5 way, 0.1” pitch, vertical, Pin 4
keyed, PIH.
Table 19: USB 2.0 Connector
Pin
Signal Name
1
USB_PWR
2
USB_D-
3
USB_D+
—
—
5
GND
NOTE: the Boot Drive Enclosure must be removed to access the USB header.
6.1.4
Intel® RAID Controller SRCSAS144E
6.1.4.1
One Battery Backup connector cable that provides connectivity between
the Intel® RAID Controller SRCSAS144E and the Battery Backup Unit
(BBU) mounted in the PCI Slot 6 position.