Intel SSR212MC2 Hardware Technical Product Specification - Page 40

Regulatory Information Intel® Storage Server SSR212MC2 7.1.3 Certifications / Registrations / Declarations UL Certification (US/Canada) CE Declaration of Conformity (CENELEC Europe) FCC/ICES-003 Class A Attestation (USA/Canada) VCCI Certification (Japan) C-Tick Declaration of Conformity (Australia) MED Declaration of Conformity (New Zealand) BSMI Certification (Taiwan) GOST R Certification / License (Russia) Belarus Certification / License (Belarus) RRL Certification (Korea) IRAM Certification (Argentina) Ecology Declaration (International) GB4943- CNCA Certification (China) 7.1.4 Component Regulation Requirement Need to Support System Level Certifications Component Power Supplies must have the following certifications: UL, cUL German Bauart CNCA China Certification Ctick DOC BSMI DOC RRL License CE DOC CB Report (including all national deviations). All peripheral devices, such as CD ROMS, Disk drives, Tape drives shall have the following certifications: UL or CSA NRTL, CSA or cUL, and TUV or VDE and SEMKO or NEMKO or DEMKO or FIMKO, CE, and FCC. All Fans shall have the minimum certifications: UL and TUV or VDE All current limiting devices shall have UL and TUV or VDE certifications and shall be suitable rated for the application where the device in its application complies with IEC60950. All lithium batteries shall be UL recognized and battery circuits are to have suitable reverse bias current protection for the application it is used in. All printed wiring boards shall be rated UL94V-0 and be sourced from a UL approved printed wiring board manufacturer. All connectors shall be UL recognized and have a UL flame rating of UL94V-0. All wiring harnesses shall be sourced from a UL approved wiring harness manufacturer. SELV Cable to be rated minimum 80 V. All plastics used must be made of a UL recognized material, and have the appropriate flame ratings mandated by IEC60950 per system level requirements. All plastics parts shall be manufactured by an UL approved fabricator and the parts shall be marked with the appropriate UL traceability markings. Markings to include: Plastic Fabricators name and/or UL Fabricator ID Material Name (for example GE, C2800) Date Code Product safety label must be printed on UL approved label stock and printer ribbon. Alternatively labels can be purchased from a UL approved label manufacturer. 32 Revision 1.2